
Буферна ємність 60 л
Insulated buffer tanks for heating systems. Stabilise heat pump operation and reduce compressor cycling.
- 60 л
- нержавіюча сталь

Termojet buffer tank (heat accumulator) for a heating system with a heat pump: compact stainless steel tanks of 60, 100 and 200 l and insulated carbon steel heat accumulators of 75–1000 l. Prices include VAT — from UAH 13,640.
Compact tanks for installation next to the heat pump · 3 bar

Insulated buffer tanks for heating systems. Stabilise heat pump operation and reduce compressor cycling.

Insulated buffer tanks for heating systems. Stabilise heat pump operation and reduce compressor cycling.

Insulated buffer tanks for heating systems. Stabilise heat pump operation and reduce compressor cycling.
30 mm PU insulation · waterproof cover · up to 95 °C

Insulated buffer tanks for heating systems. Stabilise heat pump operation and reduce compressor cycling.

Insulated buffer tanks for heating systems. Stabilise heat pump operation and reduce compressor cycling.

Insulated buffer tanks for heating systems. Stabilise heat pump operation and reduce compressor cycling.

Insulated buffer tanks for heating systems. Stabilise heat pump operation and reduce compressor cycling.

Insulated buffer tanks for heating systems. Stabilise heat pump operation and reduce compressor cycling.

Insulated buffer tanks for heating systems. Stabilise heat pump operation and reduce compressor cycling.

Insulated buffer tanks for heating systems. Stabilise heat pump operation and reduce compressor cycling.
The tank volume is selected to match the capacity of the heat pump for heating. The ranges are approximate — the same as in the filter above the products; the exact volume depends on the system layout.
| Heat pump capacity | Volume | Models |
|---|---|---|
| up to 9 kW | 60–100 l | 60, 75, 100 l |
| 9–16 kW | 100–200 l | 100, 150, 200 l |
| 16–20 kW | 200–300 l | 200, 300 l |
| 20–32 kW | 300–500 l | 300, 500 l |
| over 32 kW | 750–1000 l | 750, 1000 l |
A 500 l heat accumulator suits a 20–32 kW heat pump — a house of roughly 200–320 m². Carbon steel tank with 30 mm PU insulation, G1¼″ connections, temperature up to 95 °C.
A 1000 l heat accumulator is installed with heat pumps over 32 kW: commercial Sunrise and Climastar units or a cascade of several heat pumps. G1½″ connections, 30 mm PU insulation, up to 95 °C.
There is no model of exactly 800 l in the range; the closest are the 750 and 1000 l heat accumulators. If the calculation gives about 800 l, 1000 l is usually chosen with a margin, and 750 l when space in the boiler room is limited. A Termojet engineer will determine the exact volume from the system layout.
For systems with a boiler, carbon steel heat accumulators are chosen: they are rated for temperatures up to 95 °C and come in volumes of 75–1000 l. A Termojet engineer will confirm whether a model suits your boiler and connection layout.
Compact stainless steel tanks of 60, 100 and 200 l are placed next to the heat pump in the boiler room or utility room: they take up minimal space and suit houses with a heat pump of up to 16 kW.
Heat accumulators of 75–1000 l are made of carbon steel, insulated with 30 mm polyurethane foam and covered with a waterproof fabric jacket. They are chosen when the tank stands in an unheated room or a volume of over 200 l is needed.
| Series | Volume | Material | Insulation | Connections | Pressure | Temp. |
|---|---|---|---|---|---|---|
| Stainless steel | 60, 100, 200 l | stainless steel | polyurethane foam | 4+1: G1¼″ (60 l), G1½″ (100 l), G2″ (200 l) | 3 bar | — |
| Carbon steel, 75–150 l | 75, 100, 150 l | carbon steel | PU 30 mm | G1½″ | 3 bar | 95 °C |
| Carbon steel, 300–1000 l | 300, 500, 750, 1000 l | carbon steel | PU 30 mm | G1¼″ (300–750 l), G1½″ (1000 l) | — | 95 °C |
A buffer tank is usually ordered together with a heat pump. If there is little space in the boiler room, consider combination tanks, where the DHW boiler and the buffer share one body.
Approximately: for 9 kW — 100 l, for 16 kW — 150–200 l. Ranges for other capacities are in the selection table above; an engineer will determine the exact volume from the layout of your system.
The carbon steel models are rated for temperatures up to 95 °C. A Termojet engineer will confirm whether the tank suits your boiler and layout.
The price of the 500 l carbon steel buffer tank is on the product card above, including VAT.
It is the same type of equipment — a tank that stores the heating system's water. In the Termojet range, compact stainless steel tanks of 60–200 l are called buffer tanks, and insulated carbon steel tanks of 75–1000 l are called heat accumulators.