Fan Coils for a Heat Pump
21 productsWall-mounted, cassette, wall/ceiling, floor-standing and ultra-slim fan coils of 1.5–21 kW for heating and cooling from a heat pump. Prices include VAT, installation not included.
Selection by room area
Found: 21
Wall-mounted fan coils
Wall 2P, 3P · heating 4.35–9.61 kW
Cassette fan coils
Cassette · heating 4.86–21.01 kW · installation in a suspended ceiling
Wall/ceiling fan coils
Universal · heating 2.7–18.9 kW
Floor-standing fan coils
Cabinet FCU 4P · heating 11.25 kW · column type
Ultra-slim fan coils
Slim · heating 1.56–8.85 kW · depth 130 mm
How to choose the fan coil type
| Type | Where it is mounted | Suitable rooms | Heating capacity |
|---|---|---|---|
| Wall-mounted | on the wall under the ceiling | bedrooms, offices, apartments | 4.35–9.61 kW |
| Cassette | in a suspended ceiling | offices, shops, restaurants | 4.86–21.01 kW |
| Wall/ceiling | on the wall or under the ceiling | living rooms, halls, commercial premises | 2.7–18.9 kW |
| Floor-standing | on the floor | lobbies, halls, production premises | 11.25 kW |
| Ultra-slim | on the wall, depth 130 mm | living rooms instead of a radiator | 1.56–8.85 kW |
How to choose the fan coil capacity
The capacity is selected by room area separately for heating and cooling — the cards show two figures: heating and cooling. If the fan coil is installed for air conditioning, go by the second figure. The ranges in the table are approximate — the same as in the filter above the products; the capacity is given according to the Termojet catalog data, and an engineer will make the exact selection.
| Room area | Heating | Models |
|---|---|---|
| up to 20 m² | up to 2 kW | Slim YG-10 |
| 20–35 m² | 2–4.5 kW | Universal FP-34, FP-51 · Wall 2P |
| 35–50 m² | 4.5–7 kW | Wall 3P · Universal FP-68, FP-85 · Cassette FP-51C–85C · Slim YG-20 |
| 50–80 m² | 7–10 kW | Universal FP-102 · Cassette FP-102C · Slim YG-30 |
| over 80 m² | over 10 kW | Universal FP-136–238 · Cassette FP-136C, 238C · Cabinet |
Connection: 2-pipe system and drainage
Termojet wall-mounted, cassette, wall/ceiling and ultra-slim fan coils work on a 2-pipe system: the same pair of pipes supplies warm water in winter and cold water in summer. Before installation, provide for a DN15 or DN20 water supply, a DN15 condensate drain and a 230 V power supply.
Fan coils together with a heat pump
Fan coils run from an air-to-water heat pump, which heats water in winter and cools it in summer. For stable operation of several fan coils, a buffer tank is installed in the system.
FAQ
How many fan coils are needed for a 150 m² house?
A fan coil is installed in each room that needs to be heated or cooled, and the capacity is selected by room area using the table above. A Termojet engineer will calculate the system from the house plan.
Can Termojet fan coils be connected to a heat pump of another brand?
A fan coil works from any source of warm or cold water at the required temperature. An engineer will check compatibility with your system.
How much does a fan coil cost?
Prices include VAT and are on the product cards. The most affordable are the Wall 2P wall-mounted and the Universal FP-34 wall/ceiling.